Custom Laser & Router

Typically our customers require complex parts that need to be cut with a high degree of accuracy. More often than not, only a laser cut will do the job without resulting in an inferior product as is often the case with other methods, such as stamping.

At Signs Alive, our equipment is state of the art, providing you with the opportunity and ability to go one step further with quality and consistency unsurpassed in the industry.

Laser Cutting

If a crease, slot, cut hole, or scribed line is required for folding or fastening, as in the packaging industry, laser cutting can solve the problem with a single program resulting in a beautifully finished product. Signs Alive does this routinely with 0.005” thick Mylar film slipcovers.

Laser Scribing

Scribing is the ability to cut part way through a material in a controlled manner. Time is money. Our lasers will increase both the speed and the accuracy of the production of your scribing needs.

Laser Marking

Marking is a form of laser scribing. Marking is described as the ability to permanently scribe a design or an alphanumerical number on a previously finished product.

Laser Etching

Etching is described as the ability to alter a surface without removing any material. Etching is a “Dot Matrix” process that scans the design onto the material. Consequently, it is slower than a vector process.

Laser Drilling

Some of our customers have a requirement for accurately sized holes located with precise control in their product. Some of these holes are not round, such as coin slots and attachment screw holes. The electronics industry has a common need that requires holes in small boxes. Usually, these holes demand close tolerance for fit of connectors and plugs.

Laser Engraving

Engraving is a process where material is removed from the surface. The engraving process is a “Dot Matrix” process and thus tends to be slower than vector cutting and scribing. This removal of material is accomplished via beam intensity.

Signs Alive! 2284 Speers Road, Oakville, ON L6L 2X8 - tel 905.844.1018 - fax 905.844.1318

Designed by: Creative Solutions Canada